The World Leader
in Alignment
Parts and Tools

Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

Jeep - Wrangler


Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. Simply determine what degree offset sleeve is already in the knuckle and replace it with a new offset. Most JL’s are coming off the line with a +.25° sleeve, which means, for example, if you need .5° more camber and have a factory +.25° sleeve you will want to use the +.75° sleeve (p/n 23403) to get in spec. If you work on a lot of Jeeps or are not sure what you will need, get the six (6) piece set, which includes one of each sleeve. SPC's camber sleeves feature a hex chromate-free finish certified to a 700 hour salt spray test.

23400 - Camber Sleeve Set (6) – 1 each of: 23401, 23402, 23403, 23404, 23405, 23409

23401 - +.25° (1/4°) Camber Sleeve
23402 - +.5° (1/2°) Camber Sleeve
23403 - +.75° (3/4°) Camber Sleeve
23404 - +1.0° (1°) Camber Sleeve
23405 - +1.25° (1-1/4°) Camber Sleeve
23409 - 0.0° (0°) Camber Sleeve

Front Adjustment Range: Camber 0°, +.25°, +.5°, +.75°, +1.0°, +1.25°
Installation time: .5 hr/side
Required: 1 kit per wheel



For more on our warranties:

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.


Distributor Login

Distributors- Click Here To Login

Rep Login

SPC Rep's- Click Here To Login

Training Login

For Online Training - Click Here To Login