Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

23403 - 3/4° CAMBER JEEP SLEEVE

---------------------------------------------------------------------------

Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. This is a .75° sleeve. Simply determine what degree offset sleeve is already in the knuckle and replace it with a new offset. Most JL’s are coming off the line with a +.25° sleeve, which means, for example, if you need .5° more camber and have a factory +.25° sleeve you will want to use the +.75° sleeve (p/n 23403) to get in spec. If you work on a lot of Jeeps or are not sure what you will need, get the six (6) piece set, which includes one of each sleeve. SPC's camber sleeves feature a hex chromate-free finish certified to a 700 hour salt spray test.

23400 - Camber Sleeve Set (6) – 1 each of: 23401, 23402, 23403, 23404, 23405, 23409

23401 - +.25° (1/4°) Camber Sleeve
23402 - +.5° (1/2°) Camber Sleeve
23403 - +.75° (3/4°) Camber Sleeve
23404 - +1.0° (1°) Camber Sleeve
23405 - +1.25° (1-1/4°) Camber Sleeve
23409 - 0.0° (0°) Camber Sleeve

Front Adjustment Range: Camber +.75°
Installation time: .5 hr/side
Required: 1 kit per wheel

Click for Installation Instructions

$45.11 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.