The World Leader
in Alignment
Parts and Tools

Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

Specialty Products Company has been helping you adjust your Camber and Toe for years with our patented EZ SHIM^TM series of products. Now, we have just made it a whole lot easier for you with our new EZ SHIM^TM online application.

Visual Cutout Diagrams.

Just enter in your Camber and Toe changes and you're instantly viewing an exact colored representation of how your shim should be properly cut-out and aligned.

Lets Make Room.

This cutter is a necessary tool for proper cutting of the EZ Shim^TM series of products. Its thin cutting blades minimize shim breakage and waste.
(part# 75915)

Bolt Me Up.

On various vehicles, the EZ SHIM^TM application may require the use of longer bolts to accommodate the newly installed shim. This set of eight bolts contain M10 x 1.5 x 40mm allen head rear hub bolts to be used with the rear shims when needed.
(part# 10408)

C'mon, Give A Little Space.

These easy to use Caliper Shim Spacers help align the caliper to the rotor after installing a camber shim. Designed to be used with the EZ SHIM^TM series of products, each pack comes with a series of 4 different sizes - 2 of each. Use one of them, use them all or save them for later.
(part# 75970)

Choosing A Location.

You'll find using our new online application to be quick and easy. To start, simply "choose your location" and begin selecting your vehicle make, model and year specifications from drop-down menus already filtered for you by your desired chosen location. After a few selections, you'll be receiving EZ SHIM^TM alignment specs in record time and will find yourself using our program again and again.

Select Your Vehicle.

With our new EZ SHIM^TM online application you are able to choose between 156 available models from 28 various vehicle manufacturers and their appropriate matching years quickly and easily.

What Ruler Are You Using?

Whether your using Decimal Degrees or Fractional Inches our EZ SHIM^TM online application provides you with five popular units of measurement to choose from: Decimal Degrees, Fractional Degrees, Degrees/ Minutes, Decimal Inches, and Fractional Inches.

Too Much Torque?

You can easily under-torque or even over-torque bolts. Over-torquing a bolt vs. under-torquing a bolt is equally a bad thing as an under-torqued bolt will cause it to cycle many more times than normal and eventually shorten the fatigue life drastically, which in turn could potentially lead to an early failure. But of course, with our new EZ SHIM^TM online application we also provide you with recommended torquing specifications.

Product Suggest.

When doing alignment installations, you'll sometimes find yourself possibly needing additional parts or spacers to compensate for that camber or toe adjustment you've made. Again, with our new EZ SHIM^TM online application you'll find that along with proper torquing specifications you'll also find Specialty Products product recommendations.

Cost Effective.

Here at Specialty Products we care about our customers and want to give back. Our new EZ SHIM^TM online application is totally cost effective - it's completely FREE!. No paying monthly subscriptions or initial usage cost. Yes, we want you to use it, abuse it and tell all your alignment buddies about how easy it is to use.

Application Search

Part Number Search

Alignments Just Got Easier.

Specialty Products Company has been helping you adjust your Camber and Toe for years with our patented EZ SHIM^TM series of products. Now, we have just made it a whole lot easier for you with our new EZ SHIM^TM online application.

Visual Cutout Diagrams.

Just enter in your Camber and Toe changes and you're instantly viewing an exact colored representation of how your shim should be properly cut-out and aligned.

Lets Make Room.

This cutter is a necessary tool for proper cutting of the EZ Shim^TM series of products. Its thin cutting blades minimize shim breakage and waste.
(part# 75915)

Bolt Me Up.

On various vehicles, the EZ SHIM^TM application may require the use of longer bolts to accommodate the newly installed shim. This set of eight bolts contain M10 x 1.5 x 40mm allen head rear hub bolts to be used with the rear shims when needed.
(part# 10408)

C'mon, Give A Little Space.

These easy to use Caliper Shim Spacers help align the caliper to the rotor after installing a camber shim. Designed to be used with the EZ SHIM^TM series of products, each pack comes with a series of 4 different sizes - 2 of each. Use one of them, use them all or save them for later.
(part# 75970)

Choosing A Location.

Select Your Vehicle.

With our new EZ SHIM^TM online application you are able to choose between 156 available models from 28 various vehicle manufacturers and their appropriate matching years quickly and easily.

What Ruler Are You Using?

Whether your using Decimal Degrees or Fractional Inches our EZ SHIM^TM online application provides you with five popular units of measurement to choose from: Decimal Degrees, Fractional Degrees, Degrees/ Minutes, Decimal Inches, and Fractional Inches.

Too Much Torque?

Product Suggest.

Cost Effective.

On-site Service

Application Search

Part Number Search

Alignments Just Got Easier.

Specialty Products Company has been helping you adjust your Camber and Toe for years with our patented EZ SHIMTM series of products. Now, we have just made it a whole lot easier for you with our new EZ SHIMTM online application.

Visual Cutout Diagrams.

Just enter in your Camber and Toe changes and you're instantly viewing an exact colored representation of how your shim should be properly cut-out and aligned.

Lets Make Room.

This cutter is a necessary tool for proper cutting of the EZ ShimTM series of products. Its thin cutting blades minimize shim breakage and waste. (part# 75915)

Bolt Me Up.

On various vehicles, the EZ SHIMTM application may require the use of longer bolts to accommodate the newly installed shim. This set of eight bolts contain M10 x 1.5 x 40mm allen head rear hub bolts to be used with the rear shims when needed. (part# 10408)

C'mon, Give A Little Space.

These easy to use Caliper Shim Spacers help align the caliper to the rotor after installing a camber shim. Designed to be used with the EZ SHIMTM series of products, each pack comes with a series of 4 different sizes - 2 of each. Use one of them, use them all or save them for later. (part# 75970)

Choosing A Location.

Select Your Vehicle.

With our new EZ SHIMTM online application you are able to choose between 156 available models from 28 various vehicle manufacturers and their appropriate matching years quickly and easily.

What Ruler Are You Using?

Whether your using Decimal Degrees or Fractional Inches our EZ SHIMTM online application provides you with five popular units of measurement to choose from: Decimal Degrees, Fractional Degrees, Degrees/ Minutes, Decimal Inches, and Fractional Inches.

Too Much Torque?

Product Suggest.

Cost Effective.

On-site Service

Distributor Login

Rep Login

Training Login

Specialty Products Company has been helping you adjust your Camber and Toe for years with our patented EZ SHIM^TM series of products. Now, we have just made it a whole lot easier for you with our new EZ SHIM^TM online application.

This cutter is a necessary tool for proper cutting of the EZ Shim^TM series of products. Its thin cutting blades minimize shim breakage and waste.
(part# 75915)

On various vehicles, the EZ SHIM^TM application may require the use of longer bolts to accommodate the newly installed shim. This set of eight bolts contain M10 x 1.5 x 40mm allen head rear hub bolts to be used with the rear shims when needed.
(part# 10408)

These easy to use Caliper Shim Spacers help align the caliper to the rotor after installing a camber shim. Designed to be used with the EZ SHIM^TM series of products, each pack comes with a series of 4 different sizes - 2 of each. Use one of them, use them all or save them for later.
(part# 75970)

With our new EZ SHIM^TM online application you are able to choose between 156 available models from 28 various vehicle manufacturers and their appropriate matching years quickly and easily.

Whether your using Decimal Degrees or Fractional Inches our EZ SHIM^TM online application provides you with five popular units of measurement to choose from: Decimal Degrees, Fractional Degrees, Degrees/ Minutes, Decimal Inches, and Fractional Inches.