Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

67690 - FORD REAR CAMBER BALL JOINT

---------------------------------------------------------------------------

Use this adjustable ball joint to get ±1.25° camber change on Ford's D3 Platform AWD vehicles like the Five Hundred, Taurus, Sable, Freestyle, and Taurus X from 2005 - 2009. Many of these vehicles develop negative camber in the rear, but there is no factory correction. To get change, you will need to press the OE ball joint out of the knuckle and replace it with this adjustable offset stud design from SPC. Once loosely reasembled, you will be able to easily turn the 8mm hex on the stud and watch camber change. Torque down the nut and your adjustment is locked in. On this adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. SPC recomends a shop press to press out the OE ball joint and press in the adjustable ball joint.

Rear Adjustment Range:
Camber: ±1.25°
Installation time: 1.2 hr/side
Required: 1 kit per wheel
________________________

Check out our installation video for this part

Click for Installation Instructions

$148.89 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.