Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

67495 - SANTA FE ADJ. REAR ARM

---------------------------------------------------------------------------

Get ±3.5° of camber and ±1.5° of toe change on the rear of the 2003 to 2006 Hyundai Santa Fe by replacing the rear upper control arm. Use the included extended range cam bolt on the lower link to extend toe if needed. Use this kit's remove & replace control arm to replace a failed OE control arm and get the ability to dial in rear camber alignment for improved tire wear and drivability. Need change on an '01 or '02? Use cam kit p/n 67493 to double the change provided by the OE cams.

Rear Adjustment Range: Camber ±3.50° Toe: ±1.50°
Installation time: .8 hr/side
Required: 1 per Wheel

Click for Installation Instructions

$203.5 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.