Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

66050 - DODGE REAR CAMBER BUSHING

---------------------------------------------------------------------------

This kit combines our previous four kits into one. Allowing adjustment of rear camber on the Chrysler LX platform cars regardless of model year and the complication that Chrysler used two different bushing sizes over the years.
These "set-at-install" bushings can be clocked to provide up to ±1.5° of adjustment by replacing the outboard bushings on both upper control arms of all Chrysler LX-based cars regardless of aluminum or steel arm construction. By using the #66025 adapter along with the #40920 bushing press, these bushings can be installed without removing the control arms.

Rear Adjustment Range: Camber ±1.5°
Install Time: .6 hr/side
Required: 1 kit per wheel
Recommended Tools: 66025 Bushing Press Sleeves, 40920 Performance Ball Joint Press

Click for Installation Instructions

Click for Frequently Asked Questions about this part

Click for CAD (Parasolid) model for this part

$68.7 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.