.png)
71520 - ±0.13° NYLON TOE SHIM
With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to ±1.0° camber change and up to ±.50° toe change. Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. For toe change, use part numbers 71520, 71521, 71522 or 71523. For Camber change use part numbers 71530, 71531, 71532 or 71533. Or you can purchase the whole assortment by ordering part number 71500.
LTD LIFETIME
For more on our warranties: https://www.spcalignment.com/index.php/warranties
VEHICLE FITMENTS:
- Audi: TT 2000 - 2006 Seat: Leon 2001 - 2004 Seat: Toledo 2001 - 2004 Volkswagen: Beetle 1998 - 2010 Volkswagen: Beetle Cabrio 2010 - 2010 Volkswagen: GTI 2006 - 2006
- Volkswagen: Golf 1999 - 2006 Volkswagen: Jetta 1999 - 2005
Hover over image to view larger
"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors or retailers for your area.
Want To Have This Part Installed?
These parts should only be installed by personnel who have the necessary skill, training, and tools to do the job correctly and safely. Incorrect installation can result in personal injury, vehicle damage, and/or loss of vehicle control.
ON-SITE SERVICE
Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.