Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

97300 - A, B & E BODY MOPAR ARMS

---------------------------------------------------------------------------

Use this patented design with the most adjustability and best clearance of any arm on the market to modernize the front suspension on your classic Mopar. SPC uses a ¼” extended ball stud to improve camber curve, now adjust in some caster and a bit of camber and enjoy the drive. These fully rebuildable and greaseable ball joints can also be rebuild as needed. Sold as pairs.

Features:

Greaseable and rebuildable ball joint

1/4" extended ball joint for improved camber curve

Adjustable camber and caster

Customize with different length ball studs

Best clearance

Front Adjustment range:
Camber ±3.0° Caster ±3.00
Required: 1 kit per axle

US Patent No. 9,751,370

Ball Joint Rebuild Kits

#97007 - Replacement Ball Joint - Taper 7.12° - Stud Length: +0.25 over OE
________________________

We have an installation video for a similar part - see below for a basic overview on how to install our muscle car adjustable upper control arms:

Click for Installation Instructions

Click for Frequently Asked Questions about this part

$1217.34 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.