Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

32115 - FORD WHEEL CENTERING TOOLS

---------------------------------------------------------------------------

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off center" or clocked position. The 32115 is for Ford F450/F550 Super Duty. These tools slide directly over the wheel studs in the 12, 4, and 8 o'clock positions. The wheel is then installed over the tools, the stud nuts added to the exposed studs and tightened. The wheel is now centered precisely. The centering tools are removed and the final stud nuts are added - torquing all nuts to mfg. specifications.

Features	Benefits
Threadless Design	Saves Installation Time
Tapered Nose	Eases Wheel Mounting
Single Set	For Steer, Drive & Trailer Axles

________________________

Click for Installation Instructions

$68.06 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

90 DAYS-MFG DEF
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.