Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

15735 - XAXIS ROD END BALL JOINT

---------------------------------------------------------------------------

Get 45˚ of articulation when you build new or replace aftermarket joints with these forged steel alloy threaded receivers and xAxis™ sealed flex joints. This assembly has LH 3/4"-16 threads, takes a 14mm bolt, and is 2.375" wide. It comes with a jam nut for your convenience and is a perfect upgrade for Jeep JK rear upper control arm bushings. The kit comes with everything you need to replace / upgrade your worn joints. This assembly utilizes a snap ring for positive retention and allows for easy replacement. (Is your Jeep running 5/8" bolts on the lower control arms? Check out our joint with a larger bolt hole p/n 15741.)

xAxis™ Rod End Ball Joint specs: LH 3/4"-16 X 14MM BH X 2.375"W

Find out about our entire xAxis™ line - download the xAxis pdf flyer here.

Click for Installation Instructions

Click for CAD (Parasolid) model for this part

Click for the Technical Data Sheet on this part

$86.55 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

NO WARRANTY
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.