Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

72610 - PORSCHE FRONT OR REAR ADJ ARMS

---------------------------------------------------------------------------

Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to ±2° camber adjustment. This pair of forged 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greaseable and rebuildable ball joint on the market If you wear out your ball joint race with heavy track use, (it happens) you can get a rebuild kit and avoid the cost of a whole new arm. These arms come with preset turning torque, if you want a looser or a tighter ball joint simply change preload by turning the retainer. This set can be used for front or rear, so if you want adjustability on all four corners get two sets.

Features
•Rebuildable ball joint is booted and greaseable
•Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight
•OE sized and style bushings can be replaced with any aftermarket bushing option
•Adjusting bolt offers infinite camber settings
•Provision for the ride height sensor of litronic headlight equipped cars

Benefits
•±2° camber adjustment
•Fast, easy, on-car adjustment
•Rebuildable ball joint

Adjustment range: Camber ±2.0°
Installation time: 1.0 hr/side
Required: 1 per axle
Recommended Tool: 72120 - Ball Joint Rebuild Wrench
________________________

Check out our installation video for this part

Click for Installation Instructions

Click for Frequently Asked Questions about this part

$1013.05 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.