Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

67105 - 1 & 3 SERIES ADJ CAMBER ARM

---------------------------------------------------------------------------

Factory camber adjustment on the rear of the BMW 1 & 3 Series is limited and often not enough. Use SPC's rear camber arm to get an additional ±3° of camber on the E90, E91, E92, & E93 as well as the E82 & E88 models. Simply replace the OE link with SPC's adjustable link and adjust camber to minimize tire wear, optimize handling, or get ready for the track. Once camber is where you want it, set toe with the OE cam and you are good to go. This arm is equipped with SPC's xAxis™ ball joint and a bonded rubber bushing to maintain factory ride quality. The arms are sold per side, get two kits if you need to adjust both sides of the car.

Rear Adjustment range: Camber ±3.00°
Installation time: .6 hr/side
Required: 1 per wheel

Click for Installation Instructions

$166.56 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.