Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

23940 - DODGE 1500 ADJ BALLJOINT

---------------------------------------------------------------------------

Lifted or lowered, factory cams don't give enough adjustment range on the Dodge Ram 1500 series of trucks. Gain 2 1/4° of camber or caster with these offset ball joints. Simply replace the ball joint in the stock upper control arm to get +/- 2 1/4° caster, camber, or a split and then dial in final adjustments with the factory cams. Bring ride quality and tire wear back into the green for your customer. SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

Adjustment Range: Camber or Caster ±2.25°
Installation Time: .6 hr/side
Required: 1 per wheel
Recommended Tools: 72509 Ball Joint Press

________________________

Click for Installation Instructions

$218.03 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.