Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

23000 - CAM/CAST SLEEVE ASSORTMENT (6)

---------------------------------------------------------------------------

These sleeves will change camber and/or caster from 1/8 degree to 1-1/2 degree in 1/8 degree increments. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve. Determine the change needed and replace the existing sleeve with the correct one.

#4169 spanner socket is required for sleeve removal.

Rotate sleeve to fine tune camber/caster adjustment. One sleeve covers one side of vehicle.
Estimated Installation Time - .5 hr/side

Formerly designated the 7979 Series.

Part No. / Total Change
23002 .25° (1/4 degree)
23004 .50° (1/2 degree)
23006 .75° (3/4 degree)
23008 1.0° (1 degree)
23010 1.25° (1-1/4 degree)
23012 1.50° (1-1/2 degree)

Click for Installation Instructions

Click for Frequently Asked Questions about this part

$226.14 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.