Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

24850 - COIL SPRING STABILIZER(4)

---------------------------------------------------------------------------

Two stabilizers are recommended per coil spring. If front stabilizers are rubbing against the spring well housing, the stabilizer must be installed from the inside of the coil springs. Four per pack.

Due to the curvature of some springs, two sizes may be required for the same spring (Example: 24700 on inside of coil, 24750 on outside). When measuring and installing stabilizers, one space should be skipped between coils.

Stabilizer Heights - Narrow Units - for small diameter (.58") coil springs

Stabilizer Number     Height ("A")
24640                       5/8"
24690                       7/8"
24750                       1-1/4"
24751                       1-1/4" - Short Nose
24740                       1-1/4" - Small Radius
24790                       1-1/2"

Stabilizer Heights - Regular Units - for average diameter (.63") coil springs

Stabilizer Number     Height ("A")
24650                       5/8"
24700                       7/8"
24701                       7/8" - Short Nose
24960                       1"
24970                       1-1/4"
24800                       1-1/2"
24850                       1-3/4"
24900                       2"
24950                       2-1/2"

Click for Installation Instructions

$21.66 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.