|
| |
| TRUCK TANDEM ALIGNMENT SYSTEM
| New Part No. |
Old Part No. |
Description |
| 91988 |
WA1988 |
Dual
Steel Wheel Rear Tandem Tracker |
| 91990 |
WA1990 |
Dual
Aluminum Wheel Rear Tandem Tracker |
| 91877 |
WA1877 |
Lo
Profile Extender Bars |
| 91888 |
WA1888 |
Tandem
Axle Caliper |
| 91887 |
WA1887 |
Kingpin
Extension - Lo Profile |
| 91889 |
WA1889 |
Trailer
Kingpin Extension |
| 91890 |
WA1890 |
Tandem
Tracker Set for Aluminum Wheels |
| 91891 |
WA1891 |
Tandem
Axle Caliper |
| 91896 |
WA1896 |
"U"
Bolt Extensions |
| 91844 |
WA1844 |
Tire
Matting Square |
| 99515 |
WA515 |
Heavy
Duty & OTR Toe Bar Set |
| 99517 |
WA517 |
Toe
Bar Set for Light Trucks |
|
91988
 |
Dual Steel
Wheel Rear Tandem Tracker
Previously #WA1988
This is a simple method for tracking the rear dual
tandems on trucks and tractors. It includes the
91896 “U” Bolt Extensions, a pair
of Lo Profile Extension Bars (91877) and a pair
of 91888 Tandem Trailer Trackers. With this system
the technician can easily check the A and D distances
along with the B and C distances to see if the
tandems are tracking correctly.
Return to top of page
|
91990
 |
Dual
Aluminum Wheel Rear Tandem Tracker
Previously #WA1990
The 91990 is a simple method for tracking the rear dual tandems on trucks
and tractors. It includes the 91896 “U” Bolt Extensions, a
pair of Lo Profile Extension Bars (91877) and 91890 Tandem Trailer Tracker
Set for Aluminum Wheels. With this system the technician can easily check
the A and D distances along with the B and C distances
to see if the tandems are tracking correctly.
Return to top of page |
91877
 |
Lo
Profile Extender Bars
Previously #WA1877
The 91877 Lo Profile Extender Bar is designed to lower the measuring point
of the tandems from the hub so that measuring the tracing of low profile
trailers, such as car carriers and moving vans can easily be done. Can
be used with either the 91888 or the 91890. Sold in pairs.
Return to top of page |
91888
 |
Tandem
Axle Caliper
Previously #WA1888
These sets are used to aid in measuring the tracking of tandem axles in
relationship to the kingpin suspensions and the front and rear axles on
the tandem. Spring loaded and adjustable they establish a measuring point
from the center of the wheel. To be used with 91889 and 91891. Sold in
pairs.
Fits steel wheels up to 22-1/2”.
Return to top of page |
91887
Height
13-1/4”
3” Spring Motion
WA1889
Maximum
Height 48”
6 Adjustments in 2” Increments
3” Spring
Motion
 |
91887 - Kingpin Extension - Low Profile
Previously #WA1887
This kingpin extension is for low profile trailer and car carriers. For
simple and fast, accurate measurements from the kingpin center to the trailer
tandems (to be used with 91888 or 91890 and 91891).
91889 - Trailer Kingpin Extension
Previously #WA1889
The trailer kingpin extension makes simple, fast, accurate measurements
from the kingpin center to the trailer tandems. It is adjustable in length
and has a spring-loaded cone that assures accurate holding to the kingpin
(to be used with 91888 or 91890 and 91891).
Return to top of page
|
91890
 |
Tandem
Tracker Set for Aluminum Wheels
Previously #WA1890
This trailer tandem tracker set for aluminum wheels, up to 28”, is
used to aid in measuring the tracking of the tandem axles in relationship
to the kingpin extension and the front and rear axles on the tandem. They
fit on the outside of the wheels so will not damage aluminum wheels and you
don’t need to remove the hub covers. Can also be used on steel wheels.
Sold in pairs.
Return to top of page |
91891
 |
Tandem
Axle Caliper
Previously #WA1891
This light weight aluminum caliper is used to check the spacing between the
axles of tractors or trailers for alignment and tracking. It has an easy
to read scale in both metric and inches, with a range of 72". To be
used with 91887, 91888 or 91990 and 91889.
Return to top of page |
91896
 |
"U"
Bolt Extensions (4)
Previously #91988
This extension set is used to measure the tandem axles on tractors in relationship
to the front spring “U” bolts. The extenders establish a measuring
point on the front axles so you can make accurate measurements to the rear
axle. Measurements “A” and “D” should be equal as
well as measurements “B” and “C” if the vehicle is
tracking correctly on the front axle. Includes 4 extenders - 2 with 3/4” threads
and 2 with 7/8” threads. Use with 91877 or 91889 and 91888 or 91890.
Return to top of page |
91844
 |
Tire
Matting Square
Previously #WA1844
This tool checks for variance in dual tire mating. Right and left tires should
not vary more than 1/2” in diameter. Compare tires by placing the long
arm against the side wall and the short arm against the tread.
Dimensions: Long Arm - 48” Short Arm - 26”
Return to top of page |
99515
99517
 |
99515-
Heavy Duty & OTR Toe Bar Set
Previously #WA515
99515 includes 10 in. extra-high stands, two standard 11 in. pointers, two
long 17 in. pointers, an 8 ft. bar and 99516 scribe.
99517-
Toe Bar Set for Light Trucks
Previously #WA517
Includes everything in the #99515 Toe Bar Set (2 - 11” stands, 2 -
17” stands, 8 ft. bar, 99516 Scribe) plus an additional pair of 5 in.
stands.
Return to top of page
|
|
|
|
|
